Baxter Black: Do It Yourself Kit
Do It Yourself Kit
This notice was found on the side of a first calf heifer at the sale barn:
INSTRUCTIONS FOR ASSEMBLY
Support Local Journalism
1) Remove calf from shipping crate. The shipping container is equipped with an automatic unloading device. If, for some reason, this unloading device jams proceed to step 2.
2) If calf-unloading mechanism fails to work you may call a local authorized factory repairman or make minor adjustments at home by following these directions.
3) Before attempting calf removal yourself study the diagram. Familiarize yourself with all the moving parts including the supporting frame, flotation bag, elastic opening, lubricating oil and enclosed calf. The calf usually comes with four foldable legs (front and back), a flexible tail and a movable head. The head should contain attachments for sight, smell and hearing.
4) To facilitate removal from the container the calf should be properly folded. Either the front legs and head should be fully extended or the back legs should be extended, tail up.
5) Once you have confirmed the calf is correctly folded it is necessary to check the container opening for size. This is done by applying gently traction to the extended legs. Primitive medieval utensils are available to aid in applying this traction: chains, head snares, eyehooks, handles and a patented bovine extractor device. (NOTE: These mechanical aids should be used with care to prevent damaged to the calf and its reusable container. Power assisted precision instruments such as tractors and four-wheel drive vehicles are not recommended!)
OPERATION OF CALF AFTER REMOVAL
1) OXYGEN ADJUSTMENT: Insure that the air pump is functioning and the breathing tube is free of packing oil. If pilot light goes out, apply intermittent pressure to the bellows.
2) FUEL: The portable calf container comes equipped with four zerks connected to the fuel reservoir. CAUTION: The initial filling is critical to insure long term smooth running of your new calf! This first tankful is loaded with special additives which help prevent breakdowns and stalling. (If the calf is not given this fuel within the first few hours, the warranty is not valid!)
3) TROUBLE SHOOTING: If overheating, knocking or leaks develop consult your local authorized factory repairman.
You are the proud owner of the 2018 Model Bovine. With proper care and maintenance it should last two to ten years. Enjoy! (Manufacturer assumes no liability or makes no promises regarding profitability of enclosed calf.)
Support Local Journalism
Readers like you make the Tri-State Livestock News’ work possible. Your financial contribution supports our efforts to deliver quality, relevant coverage of the livestock industry.
Now more than ever, your support is critical to help us keep our community informed about the evolving coronavirus pandemic and the impact it is having locally. Every contribution, however large or small, will make a difference.
Each donation will be used exclusively for the development and creation of increased news coverage.
Start a dialogue, stay on topic and be civil.
If you don't follow the rules, your comment may be deleted.